A Grout Sealing Job in Arlington, VA Left This Bathroom Floor Fully Protected and with a Brand-New Look
September 12, 2018
Grout sealing is an important process to prevent damages on tiled surfaces. Grout is a vulnerable component because it is commonly cement-based and porous. This means it readily absorbs all sorts of external agents like dirt, grime, cleaner residue, and water. When this happens, the grout lines acquire a darkish color, spoiling the appearance of the entire surface. Properly sealed grout endures daily wear and tear and is resistant to damages. For this reason, it is necessary to seal the grout lines upon installation in order to maintain the integrity of the surface. To keep the grout protected, the sealant needs periodical checkups and replacement. However, grout sealing is a difficult procedure that requires professional tools and expertise.
For our next client, cleaning his bathroom had become a struggle. No matter how much he tried, the gout lines on the floor remained dirty. Determined to solve the issue, he used products like vinegar, ammonia, and other harsh cleaners, but nothing seemed to work. In fact, he noticed negative changes on the surface. After considering his options, he decided to look for professional assistance. Fortunately, this decision led him to find Sir Grout Washington DC Metro. Later, our Arlington Grout Sealing
experts were able to fix the problems and prevent any more damage.
When he called his sister and told her about his problem, she immediately recommended Sir Grout Washington DC Metro. We had successfully restored her marble floors a few months ago. She advised him to check out our website to get more information. Following his sister's suggestion, he went online to visit our site. On the page, he read testimonials from our previous satisfied customers and saw the pictures on the picture gallery
. After browsing our site, he was convinced we could help him. He scheduled a free in-home consultation by filling out the "Request a Quote" form.
We arrived a few days later for the evaluation of the bathroom and to offer an effective solution for its restoration. The owner greeted us, and after a brief introduction, we proceeded with the inspection of the surface. At first glance, we noticed the grout lines on the floor suffered from accumulation of dirt and grime. Because of this, the grout had acquired a darkish tone that gave the entire floor a dirty appearance. We told the owner that daily wear and tear, improper cleaning methods, and using harsh products were the cause of this problem. Another major flaw we spotted was that the grout lines were not sealed. We explained that it is important to seal the grout because of its porous composition. We concluded that the bathroom's floor needed our special process.
We offered a grout sealing service to shield the grout lines with our sealant and keep any future damage at bay. We would achieve full restoration with our top of the line products, high-end equipment, and tested methods. We assured the owner her bathroom would have a beautiful new appearance when we were finished. The owner was happy with our assessment and the solution we proposed, so she decided to hire us.
We returned to our client's house on the appointed date to begin the grout sealing process. This procedure consists of several steps and requires our special techniques and professional equipment. We began by cleaning the bathroom's floor using our exclusive pH-neutral natural hard surface cleaner and a high-speed scrubber. This top-notch product is soap-free and won't cause any damage because it doesn't leave any residue that the grout could absorb. Moreover, it won't discolor or stain the tiles. Additionally, it now has an enhanced antimicrobial formula that can help inhibit the growth of bacteria and fungi for up to a week after application. When we completed this step, the bathroom's floor was no longer dirty. We continued by cleaning the grout and performing the necessary repairs. We thoroughly worked on the entire surface until all the problems were fixed.
Once we finished the repairs, we were ready to perform the sealing process. We sealed the grout lines with the best sealant, our state-of-the-art ColorSeal. This exclusive product closes off water absorption and protects the surface against dirt, grime, and all other harmful external agents. Thanks to its special properties, maintaining the surface isn't a problem because it makes cleaning routines easier and faster. Furthermore, it has a large selection and variety of colors. This allows the owner to match the grout with the tiles and improve the appearance of his surface. When we finished all the steps, the bathroom's floor was sealed, protected, and looking beautiful. With the right maintenance, this great condition would last for a long time.
We showed our client the results of our work. He was in awe when he saw the renovated appearance of the bathroom. The floor looked as good as when it was newly installed. He was pleased because this amazing restoration had been cost-effective and fast. Our performance had gone beyond his expectations and he stated that from that point on, TagSiteName would be his company of choice for any hard surface restoration he might need in the future. After thanking us, the owner said he would certainly recommend our services to all his friends, family, and neighbors.
As always, we took take time to teach our client how to perform proper maintenance, so cleaning routines are easier, faster, and safer. We recommended cleaning the surface every week using pH-neutral soap-free cleaners like Sir Grout's Natural Hard Surface Cleaner
. Our product doesn't leave residue and won't cause any damage to the tiles and grout. It now has an antimicrobial agent that provides protection against bacteria and fungi. Soap-based cleaners, on the other hand, should be avoided. They leave a film that seeps deep into the grout lines, giving the surface an unsightly appearance and promoting mold and mildew growth. To keep the bathroom in top condition, establish a cleaning routine for every one or two weeks. This will prevent soap scum buildup and other signs of deterioration.
Due to the high moisture levels of the environment, it's necessary to keep the bathroom well ventilated and dry. This is important because damp areas are the perfect breeding ground for mold and mildew. To prevent fungi growth, leave the door ajar or a window open after using the shower. This will allow humidity to flow freely. Also, when drying the surface, use a squeegee, a towel, or a terry cloth. Scrub gently to avoid scratches. In addition, we suggested replacing bar soaps with liquid soaps. This is because bar soaps leave residue that builds-up soap scum. Even if the bathroom has not presented this problem yet, nasty-looking stains can begin to appear. Using soaps that don't leave any residue is the best way to prevent this issue.
At Sir Grout Washington DC Metro we have the answer to your hard surface problems. Our award-winning processes can give your dirty bathroom a clean new look. We have extensive experience in grout sealing and we can restore your surface in just one day. As a leading company in the hard surface restoration industry, we have effective solutions and qualified technicians at your disposal. Don't hesitate contacting us by calling (703) 594-2260
or by filling out our "Request a Quote" form for a free in-home consultation. We will be happy to attend you. Also, be sure to subscribe to our newsletter
to receive our latest info and promotions.
If you found this article helpful then let us know in the comments section below. Likewise, feel free to share it using the share options below. Want us to cover another topic of your interest pertaining to Hard Surface Restoration? If so, then like us and follow us on social media, and post to any of our social media profiles the topic you'd like us to discuss: Facebook Sir Grout Washington DC Metro
, Twitter @SGWashingtonDC
, Instagram @sirgrout
, and Google+ Sir Grout Washington DC Metro